Help for ordering propellers

Size: 

The size of the propeller consists of the hub thickness x

Ex:     2.25 x 60 x 44  (2.25 hub thickness x 60" length x 44" pitch)

Bolt pattern:

The bolt pattern consists of # of bolts x size of bolts x bolt circle diameter.  The bolt circle diameter is the measurement from center of one bolt to center of bolt diagonally across.

Ex:  6 x 1/4 x 75mm  (6 holes, 1/4" size, and 75mm bolt circle diameter)

Rotation:

We view the rotation of the prop as standing behind the aircraft and looking to see which way the prop turns. 

If the prop turns counter-clockwise the rotation is LH, if the prop turns clockwise the rotation is RH.

Aircraft/Engine:

Knowing the type of aircraft and engine will help us confirm if the prop you are ordering will work for your application.  The more info you put here the better.  Try to include aircraft name, engine name and HP, and whether you are belt or gear driven.

Leading Edge Protection:

We do offer some extra leading edge protection at an extra cost. 

Leading Edge Tape is $10 per prop and the Uralite Leading Edge is $50.

Centerhole:

Our props come standard with a 1" c-hole.  Measure your centerhole.  What size is it?  Does it go all the way through the propeller?  If it only goes part way through, what is the bigger hole size, and how deep does it go through prop?

Comments:

Include here is you have any special characteristics.  You can specify narrow tips, counter-bore and center-hole measurements and depths, tip color, prop shape.  Anything here will help us get the exact prop you want.  If you have ordered before, you can mention that here and we can pull up your previous order.